How to Measure an RV Window for Replacement

To measure an RV window for replacement, record the rough wall cutout width and height, the corner radius, and the wall thickness — not the visible glass size. Add the manufacturer and part number from the frame tag, note whether the window is a slider, torque or awning style, and photograph the interior and exterior trim ring. Those six data points let a supplier identify the unit even when the model is discontinued.

The measurements that matter

RV windows are sized by the hole in the sidewall, because the frame clamps to the wall from both sides. Measuring the glass gives you a number no supplier can use.

Cutout width and height: measure the opening itself, corner to corner, to the nearest 1/8 inch
Corner radius: trace a corner on paper or measure the arc — common radii are 1", 1.5", 2", 3" and 4"
Wall thickness: pull the interior trim ring and measure the sandwich — usually 1 3/4" to 2 1/2"
Style: slider (horizontal), torque/awning (bottom-hinged crank), or fixed picture window
Egress: note if the window is a marked emergency exit — those are code items and cannot be substituted
Tint: clear, gray or bronze; matching the rest of the coach matters visually

Find the tag before you measure

Most RV windows carry a small stamped or printed tag with the maker and a part number — check the bottom edge of the sash, the inside of the frame with the window slid open, and the top interior corner. If you find it, the part number outranks every measurement you take.

Photos that prevent reorders

Send these with your measurements and quote requests.

Straight-on exterior shot of the whole window
Interior shot showing the trim ring and latch style
Close-up of the frame tag
Corner close-up showing the radius
A wide shot of that side of the coach for context

When to stop and call a specialist

If the window is a bonded frameless unit, a curved or contoured panel, or a marked emergency exit, measure for information but let a specialist confirm before ordering. Those three categories account for most of the costly wrong-part orders we see.

Frequently Asked Questions

Do I measure the glass or the opening?

The opening. RV window sizes refer to the sidewall cutout, and a clamp-ring frame overlaps that opening on both sides.

What if I cannot find a part number?

Cutout dimensions plus corner radius, wall thickness and clear photos are enough for an experienced supplier to match a unit from a catalog in most cases.

Can I reuse the existing frame?

Often yes, if it is straight and uncorroded. Glass-only replacement into a sound frame is the cheapest route and avoids disturbing the butyl seal against the sidewall.

Get RV Glass Quotes Near You

Tell us about your RV and we'll match you with a verified mobile or in-shop RV glass specialist in your area.

Prefer to browse first? Search RV glass shops by zip code.